DG441LDY-E3

60ns, 35ns SPST - NC 30Ohm Analog Switches BREAK-BEFORE-MAKE DG441 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG441LDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 933
Description: 60ns, 35ns SPST - NC 30Ohm Analog Switches BREAK-BEFORE-MAKE DG441 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Resistance	33Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	650mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG441
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	10μA
Power Dissipation	650mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	60 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	30Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	60ns, 35ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	17Ohm
Normal Position	NC
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16

DG441LDY-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with DG441. It has an internal resistance of 33Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. 2.7V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 10μA. Putting voltage greater than 1μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. When using dual power supplies, you should attach at least 3V. There are SEPARATE OUTPUT outputs on this analog switch ic. A 4 input needs to be operated. There is also ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY to look out for in this electronic part. Drain to Source resistance is 17Ohm.

DG441LDY-E3 Features

1 Channels
Switch Circuit: SPST - NC
10μA Supply Current
-3db Bandwidth: 280MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Drain-to-Source resistance: 17Ohm