DG442BDN-T1-E4

220ns, 120ns SPST - NO 80Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 500pA 15V 16-VQFN Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG442BDN-T1-E4
Package: 16-VQFN Exposed Pad
Datasheet: PDF
Stock: 417
Description: 220ns, 120ns SPST - NO 80Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 500pA 15V 16-VQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad
Number of Pins	16
Weight	57.09594mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	90Ohm
Terminal Finish	PALLADIUM GOLD OVER NICKEL
Subcategory	Multiplexer or Switches
Max Power Dissipation	850mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG442
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	25V
Min Supply Voltage	13V
Operating Supply Current	5μA
Power Dissipation	850mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	220 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	80Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	220ns, 120ns
Charge Injection	-1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height	950μm
Length	4mm
Width	4mm
RoHS Status	ROHS3 Compliant

DG442BDN-T1-E4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. This electronic part offers high-quality output due to its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with DG442. There is 90Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 25V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 13V. The analogue multiplexer could operate on 5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIf you are using a dual power supply, you should attach at least 7V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Among the inputs that can be operated are the 4 inputs.