DG442DY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | +-15V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 15μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 60 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 210ns |
| Drain to Source Resistance | 50mOhm |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
DG442DY Overview
The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. Advanced packaging method Bulk is used to provide high reliability. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. It has an internal resistance of 160Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Digital switch that provides Dual, Single power at a cost-effective price. This digital switch can be operated with a current of 15μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Temperatures over 85°C should not be allowed for the multiplexer to operate. It has a Drain to Source resistance of 50mOhm ohms. 4-bit operation is possible. Analog switch ics need a voltage of 5V to be powered.
DG442DY Features
1 Channels
15μA Supply Current
Drain-to-Source resistance: 50mOhm
4-Bit
DG442DY Applications
There are a lot of Intersil (Renesas Electronics America) DG442DY Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Modems
- Channelized and Unchannelized DS3 applications
- Microprocessor controlled systems
- Communication systems
- Relay replacements
- Battery Powered Systems
- ISDN NT1/TA
- Multiplexers
- Audio and video routing
