DG442DY-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | +-15V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 15μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 60 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 210ns |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG442DY-T Overview
Shipping overseas is convenient with the electronic component packed in SOIC. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. Analog switches have 160Ohm internal resistance. There is Multiplexer or Switches analog multiplexer like this in the world. Digital switch that provides Dual, Single power at a cost-effective price. This multiplexer would work with 15μA current. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. 4-bit operation is possible. To supply the switch device, a voltage of 5V must be applied.
DG442DY-T Features
1 Channels
15μA Supply Current
4-Bit
DG442DY-T Applications
There are a lot of Intersil (Renesas Electronics America) DG442DY-T Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- Remote wireless modules
- Imaging
- Audio signal routing
- Intelligent PBX
- Medical Instrumentation
- New designs requiring multiplexer functions
- RGB switches
