DG442ETE+
| Parameters | |
|---|---|
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 170ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 120ns |
| Normal Position | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG442 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 4Ohm |
DG442ETE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad. High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. This multiplexer is composed of 4 circuits. Search with DG442 if you are looking for analog multiplexer variants. A analogue multiplexer of this type is a Multiplexer or Switches. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
DG442ETE+ Features
1 Channels
Switch Circuit: SPST - NO
DG442ETE+ Applications
There are a lot of Maxim Integrated DG442ETE+ Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Precision instrumentation
- Isolation
- Microwave transmission systems
- Residential Gateways, Home Gateway/Router
- Industrial and process control systems
- Public switching systems
- Ultrasound
- Video switching
- Medical
