DG442LDQ-T1-E3

60ns, 35ns SPST - NO 30Ohm Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG442LDQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 939
Description: 60ns, 35ns SPST - NO 30Ohm Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 1nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	35Ohm
Terminal Finish	PURE MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG442
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	10μA
Nominal Supply Current	30nA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	60 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±3V~6V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	280MHz
On-State Resistance (Max)	30Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 6pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	60ns, 35ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	70ns
Drain to Source Resistance	17Ohm
Normal Position	NO
Height	920μm
Length	5.08mm
Width	4.4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG442LDQ-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used for these analog switches. Using the DG442 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 35Ohm. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 2.7V. For this digital switch to work, 10μA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. For dual power supplies, a voltage of at least 3V should be attached. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Among the inputs that can be operated are the 4 inputs. Resistivity from Drain to Source is 17Ohm for this electronic part.