DG444DJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG444 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 512/+-15V |
| Number of Channels | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -10V |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 250ns, 140ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 120ns |
| Drain to Source Resistance | 50Ohm |
| Normal Position | NC |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG444DJ+ Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. A 10V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching with DG444 to find analog multiplexer variants. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There is 50Ohm resistance between Drain and Source for this electronic part.
DG444DJ+ Features
4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 50Ohm
DG444DJ+ Applications
There are a lot of Maxim Integrated DG444DJ+ Analog Switches & Multiplexers ICs applications.
- Communications systems
- USB 1.1 signal switching circuits
- Channel Banks
- PCMCIA cards
- Modems
- MP3 players
- High-Voltage
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Data switching
- DVD-R
