DG444DYZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE WITH 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 18V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 100pA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 450 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 60 dB |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG444DYZ-T Overview
Shipping overseas is convenient due to the electrical component's packing in SOIC. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. In this multiplexer, the internal resistance is 160Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 40V. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 5V should be applied to the electronic component. The switch device would be able to operate with 100pA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. It is recommended that you attach at least 5V to your dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 18V are compatible with the electrical part. You shouldn't miss the additional features of the electrical component, such as: IT CAN ALSO OPERATE WITH 12V SINGLE SUPPLY. The switches should not operate in an environment where the temperature is higher than 85°C. 4-bit operation is possible.
DG444DYZ-T Features
1 Channels
100pA Supply Current
Additional Features: IT CAN ALSO OPERATE WITH 12V SINGLE SUPPLY
4-Bit
DG444DYZ-T Applications
There are a lot of Intersil (Renesas Electronics America) DG444DYZ-T Analog Switches & Multiplexers ICs applications.
- Power routing
- Digital access cross connects
- USB 1.1 signal switching circuits
- Cable PC
- Cable Modem
- Microwave transmission systems
- Precision instrumentation
- Data Acquisition Systems
- Fault Tolerant Systems
- Fiber to the Home
