DG445CJ
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG445 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 512/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -10V |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 170ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 170ns |
| Normal Position | NO |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
DG445CJ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. Powered by a 10V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Use DG445 to search for variants of the digital switches. In this analog multiplexer, the value is Multiplexer or Switches. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
DG445CJ Features
1 Channels
Switch Circuit: SPST - NO
DG445CJ Applications
There are a lot of Maxim Integrated DG445CJ Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Sample-and-hold systems
- PBXs
- Avionics
- USB 1.1 signal switching circuits
- Medical systems
- 65 V DACs
- Transmit
- SDH/SONET multiplexers
- Cellular phones
