DG445CY

250ns, 170ns SPST - NO 85Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG445CY
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 393
Description: 250ns, 170ns SPST - NO 85Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Switch-off Time-Max	170ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	85Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	10V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	DG445
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	24V
Min Supply Voltage	10V
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-10V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	250ns, 170ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	4 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	250ns

DG445CY Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 10V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG445. Internally, this switch multiplexer has a resistance of 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 24V to the switch device in normal circumstances. 10V is the lowest voltage that should be fed to the electronic electronic part. There is no problem with using dual supply voltage, but it should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.