DG445DJ

250ns, 170ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG445DJ
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 274
Description: 250ns, 170ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	50Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	10V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	DG445
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Power Supplies	512/+-15V
Number of Channels	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Nominal Supply Current	5μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-10V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	250ns, 170ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	4 Ω (Max)
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	50Ohm
Normal Position	NO
Length	19.175mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

DG445DJ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 4 channels. A 10V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching for the analog switch ic with DG445 if you are looking for variants. In this multiplexer, the internal resistance is 50Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 10V. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. When using dual power supplies, you should attach at least 4.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electrical part is compatible with 18V operating voltages. The Drain to Source resistance of this electronic component is 50Ohm.