banner_page

DG445DJ+

250ns, 170ns SPST - NO 85Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG445DJ+
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 429
  • Description: 250ns, 170ns SPST - NO 85Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 10V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 10V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DG445
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Power Supplies 512/+-15V
Number of Channels 4
Voltage - Supply, Single/Dual (±) 10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup) -10V
On-State Resistance (Max) 85Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 4pF 4pF
On-state Resistance Match-Nom 4Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 250ns, 170ns
Charge Injection 5pC
Channel-to-Channel Matching (ΔRon) 4 Ω (Max)
Crosstalk -100dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 250ns
Switch-off Time-Max 170ns
Drain to Source Resistance 50Ohm
Normal Position NO
Length 19.175mm
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DG445DJ+ Overview


The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. With a 10V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. SPST - NO switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with DG445. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It has a Drain to Source resistance of 50Ohm ohms.

DG445DJ+ Features


4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 50Ohm

DG445DJ+ Applications


There are a lot of Maxim Integrated DG445DJ+ Analog Switches & Multiplexers ICs applications.

  • PCMCIA cards
  • Cross Connects
  • Microprocessor controlled systems
  • DSLAMs
  • 65 V DACs
  • Battery-powered systems
  • Medical systems
  • Audio and video switching
  • Remote wireless modules
  • Cable Modem

Write a review

Note: HTML is not translated!
    Bad           Good