DG448DV-T1-E3

130ns, 95ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE DG448 6 Pins 1nA 15V SOT-23-6 Thin, TSOT-23-6

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG448DV-T1-E3
Package: SOT-23-6 Thin, TSOT-23-6
Datasheet: PDF
Stock: 493
Description: 130ns, 95ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE DG448 6 Pins 1nA 15V SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	SOT-23-6 Thin, TSOT-23-6
Number of Pins	6
Weight	19.986414mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
Resistance	25Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	570mW
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG448
Output	SEPARATE OUTPUT
Pin Count	6
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	7V
Operating Supply Current	16μA
Nominal Supply Current	16μA
Power Dissipation	570mW
Max Supply Current	30μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	7V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	95 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	130ns, 95ns
Charge Injection	10pC
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	17Ohm
Normal Position	NO
Height	1mm
Length	3.05mm
Width	1.65mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount

DG448DV-T1-E3 Overview

The electrical component comes in SOT-23-6 Thin, TSOT-23-6 packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 6 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 6 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Search with DG448 if you are looking for analog multiplexer variants. This digital multiplexer has 25Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 36V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 7V. For this digital switch to work, 16μA current would suffice. A voltage higher than 30μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIf you are using dual power supplies, you should attach at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. Among the inputs that can be operated are the 1 inputs. Drain to Source resistance for this electronic component is 17Ohm.