DG453EY-T1-E3

118ns, 97ns SPST - NO/NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG453 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG453EY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 770
Description: 118ns, 97ns SPST - NO/NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG453 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	5.3Ohm
Terminal Finish	MATTE TIN
Additional Feature	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG453
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	12V
Operating Supply Current	5μA
Power Dissipation	600mW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	118 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	97 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	5.3Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	31pf 34pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	118ns, 97ns
Charge Injection	22pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	256ns
Switch-off Time-Max	113ns
Voltage - Supply, Dual (V±)	±5V~15V
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG453EY-T1-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. 16 pins are injected to the electronic part body. The analog switch ics are built using SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. If you are looking for variants of the digital switch, trying search with DG453. It has an internal resistance of 5.3Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 12V. This digital switch can be operated with a current of 5μA. Putting voltage greater than 500nA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. You should attach at least 5V voltage if you are using dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating the 4 inputs requires 4 inputs. Don’t miss additional features of the electronic component such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.