DG454EQ-T1-E3

118ns, 97ns SPST - NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG454 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG454EQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 999
Description: 118ns, 97ns SPST - NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG454 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	7.3Ohm
Terminal Finish	MATTE TIN
Additional Feature	ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG454
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	12V
Operating Supply Current	100μA
Power Dissipation	450mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	118 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	97 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	5.3Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	31pf 34pF
On-state Resistance Match-Nom	0.12Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	118ns, 97ns
Charge Injection	22pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	112ns
Normal Position	NC
Voltage - Supply, Dual (V±)	±5V~15V
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG454EQ-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPST - NC switching circuits. It consists of 4 circuits. Try searching for the analog switch ic with DG454 if you are looking for variants. The internal resistance of this digital multiplexer is 7.3Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 12V should be applied to the electronic component. This multiplexer would work with 100μA current. A digital multiplexer may suffer damage if voltage is applied above 100μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 4 inputs, there are several steps to follow. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.