banner_page

DG455EQ-T1-E3

118ns, 97ns SPST - NO 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG455 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-DG455EQ-T1-E3
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 121
  • Description: 118ns, 97ns SPST - NO 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG455 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2017
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 7.3Ohm
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG455
Pin Count 16
Polarity Non-Inverting
Number of Channels 1
Number of Circuits 4
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 100μA
Power Dissipation 450mW
Max Supply Current 100μA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.12Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 112ns
Normal Position NO
Voltage - Supply, Dual (V±) ±5V~15V
Height 920μm
Length 5.08mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

DG455EQ-T1-E3 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~125°C TA extended. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. This electrical component is included in the 16 series of products. SPST - NO switching circuits are used in these analog switch ics. This multiplexer is composed of 4 circuits. Try searching with DG455 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 7.3Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. An effective Dual, Single supply digital multiplexer. There should be 12V voltage fed to the electrical part below 12V. It would be sufficient to run this analogue multiplexer with 100μA current. Putting voltage greater than 100μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. The voltage should be at least 5V if you are using dual power supplies. It is possible to operate 4 inputs. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY.

DG455EQ-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO
100μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY

DG455EQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG455EQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • USB 1.1 signal switching circuits
  • Cable PC
  • Low-Voltage
  • HDTV
  • PBX interfaces
  • Data Acquisition Systems
  • Channel Banks
  • 65 V DACs
  • Routers
  • Medical Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good