DG458AK/883
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.5kOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 22V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 600mW |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 15pF |
| Switch Time (Ton, Toff) (Max) | 250ns, 250ns |
| Channel-to-Channel Matching (ΔRon) | 90 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG458AK/883 Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. This multiplexer is composed of 1 circuits. There is 1.5kOhm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 22V voltage to the switch device. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. With dual power supplies, you should attach at least 4.5V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating 8 inputs is required.
DG458AK/883 Features
8 Channels
DG458AK/883 Applications
There are a lot of Vishay Siliconix DG458AK/883 Analog Switches & Multiplexers ICs applications.
- Isolation
- Channelized and Unchannelized DS3 applications
- USB 1.1 signal switching circuits
- Sample hold systems
- Cross Connects
- Cell phones
- Battery Powered Instruments
- RGB switches
- Mechanical reed relay replacement
- Digital Cross-Connects
