banner_page

DG458DJ

250ns, 250ns 1.5kOhm Analog Switches 1nA 16-DIP (0.300, 7.62mm)


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-DG458DJ
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 464
  • Description: 250ns, 250ns 1.5kOhm Analog Switches 1nA 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Supplier Device Package 16-PDIP
Weight 1.627801g
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2014
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 1.5kOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Max Power Dissipation 1W
Operating Supply Voltage 15V
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 36V
Min Supply Voltage 13V
Max Supply Current 100μA
Propagation Delay 500 ns
Turn On Delay Time 250 ns
Supply Type Dual, Single
Turn-Off Delay Time 250 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 1.5kOhm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 8:1
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 15pF
Switch Time (Ton, Toff) (Max) 250ns, 250ns
Channel-to-Channel Matching (ΔRon) 90Ohm
Voltage - Supply, Dual (V±) ±4.5V~18V
Height 3.81mm
Length 21.33mm
Width 7.11mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

DG458DJ Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. Due to its 1 channels, the electrical component produces high-quality output. Circuits number 1 make up this analogue multiplexer. There is 1.5kOhm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 13V is the lowest voltage the electrical component should receive. The switch multiplexer may be damaged if it is exposed to voltage greater than 100μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. It can operate from 15V operating voltages. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. 16-PDIP package is offered by suppliers.

DG458DJ Features


1 Channels

DG458DJ Applications


There are a lot of Vishay Siliconix DG458DJ Analog Switches & Multiplexers ICs applications.

  • Fiber In The Loop (FITL)
  • Automotive applications
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • ATM
  • Public switching systems
  • Digital Cross-Connects
  • MP3 players
  • Multi-Line E1 Interface Cards
  • Isolation
  • Video switching

Write a review

Note: HTML is not translated!
    Bad           Good