DG459DJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.5kOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1W |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Max Supply Current | 100μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 250 ns |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 1.5kOhm |
| Min Dual Supply Voltage | 7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 250ns, 250ns |
| Channel-to-Channel Matching (ΔRon) | 90Ohm |
| Drain to Source Resistance | 1.2kOhm |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG459DJ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. A electrical component with 2 channels is capable of high-quality output. SP4T switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. This digital multiplexer has 1.5kOhm internal resistance. For functions related to 16 pins, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. 13V should be the lowest voltage fed to the electronic component. Put voltage above 100μA on the multiplexer to cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. The electrical part can be operated at 15V voltage levels. Temperatures above 85°C should not be used to operate the switches. The Drain to Source resistance of this electronic component is 1.2kOhm. It is offered by suppliers in package 16-PDIP.
DG459DJ Features
2 Channels
Switch Circuit: SP4T
Drain-to-Source resistance: 1.2kOhm
DG459DJ Applications
There are a lot of Vishay Siliconix DG459DJ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Sample-and-hold systems
- Isolation
- MP3 players
- Mechanical reed relay replacement
- Fault Tolerant Systems
- Industrial control systems
- Remote Powered Equipment
- Signal routing between systems
- E1 Multiplexer
