DG459DJ-E3

250ns, 250ns SP4T 1.5kOhm Analog Switches BREAK-BEFORE-MAKE DG459 16 Pins 1nA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG459DJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 448
Description: 250ns, 250ns SP4T 1.5kOhm Analog Switches BREAK-BEFORE-MAKE DG459 16 Pins 1nA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.5kOhm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ACTIVE OVERVOLTAGE PROTECTION
Max Power Dissipation	1W
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG459
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	100μA
Nominal Supply Current	50μA
Max Supply Current	100μA
Propagation Delay	500 ns
Turn On Delay Time	250 ns
Logic Function	Multiplexer
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	1.5kOhm
Min Dual Supply Voltage	7V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	90 dB
Neg Supply Voltage-Max (Vsup)	-18V
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 10pF
On-state Resistance Match-Nom	90Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 250ns
Channel-to-Channel Matching (ΔRon)	90 Ω
Switching	BREAK-BEFORE-MAKE
Neg Supply Voltage-Min (Vsup)	-4.5V
Voltage - Supply, Dual (V±)	±4.5V~18V
Height	3.81mm
Length	21.33mm
Width	7.11mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG459DJ-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. A 4 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Try searching with DG459 if you're looking for variants. As far as internal resistance is concerned, it has 1.5kOhm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 36V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 13V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 100μA. The analogue multiplexer may be damaged if voltage is greater than 100μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. Operating voltages of 15V are compatible with the electrical part. There is also ACTIVE OVERVOLTAGE PROTECTION to look out for in this electronic part.