DG469EQ-T1-E3

166ns, 108ns SPDT 6Ohm Analog Switches BREAK-BEFORE-MAKE DG469 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG469EQ-T1-E3
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 227
Description: 166ns, 108ns SPDT 6Ohm Analog Switches BREAK-BEFORE-MAKE DG469 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Weight	139.989945mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG469
Pin Count	8
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	15V
Min Supply Voltage	4.5V
Operating Supply Current	3μA
Nominal Supply Current	3μA
Power Dissipation	320mW
Max Supply Current	6μA
Turn On Delay Time	166 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	12V ±4.5V~15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	108 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	6Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 85pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	166ns, 108ns
Charge Injection	58pC
Channel-to-Channel Matching (ΔRon)	120m Ω
Crosstalk	-63dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
On-State Resistance	3.6Ohm
Height	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG469EQ-T1-E3 Overview

Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. There are 8 pins injected into the electronic part body. SPDT switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with DG469. There is 8Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 15V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. For this digital switch to work, 3μA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 6μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 4.5V. The 1 inputs need to be operated in order to work. The analog switch ics includes 2 outputs.