DG470EY-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 8Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 400mW |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG470 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 3μA |
| Power Dissipation | 400mW |
| Max Supply Current | 6μA |
| Turn On Delay Time | 166 ns |
| Number of Inputs | 1 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 108 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 6Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 37pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 166ns, 108ns |
| Charge Injection | 58pC |
| Channel-to-Channel Matching (ΔRon) | 120m Ω |
| Crosstalk | -63dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~15V |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG470EY-T1-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 8-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~125°C TA. A total of 8 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 8 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. This multiplexer is composed of 1 circuits. Use DG470 to search for variants of the digital switches. It has an internal resistance of 8Ohm. Datasheets for functions of 8 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 36V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 12V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 3μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 6μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIf you are using dual power supplies, you should attach at least 4.5V. Operating 1 inputs is required. The analog switch ics has 2 outputs.
DG470EY-T1-E3 Features
1 Channels
Switch Circuit: SPDT
3μA Supply Current
DG470EY-T1-E3 Applications
There are a lot of Vishay Siliconix DG470EY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Industrial
- Battery-powered systems
- High-Voltage
- Audio and video routing
- Low-Voltage
- Central office
- Audio/video switches
- DSLAMs
- Wireless Local Loop
- Precision test equipment
