DG506AAK/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 400Ohm |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.2W |
| Number of Inputs | 16 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 400Ohm |
| Screening Level | MIL-STD-883 |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 45pF |
| On-state Resistance Match-Nom | 14.4Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 24 Ω |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.92mm |
| Length | 36.83mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG506AAK/883 Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 16:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 28. By its 16 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 28 series. 1 circuits are used in this analogue multiplexer. The internal resistance of this digital multiplexer is 400Ohm. Datasheets for 28 pin functions are available upon request. There is no problem with using dual supply voltage, but it should not exceed 22V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. A 16 input needs to be operated.
DG506AAK/883 Features
16 Channels
DG506AAK/883 Applications
There are a lot of Vishay Siliconix DG506AAK/883 Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Public switching systems
- Audio and video signal routing
- Microwave transmission systems
- T1/E1 Terminals
- Battery Powered Instruments
- Access Concentrators
- Imaging
- Cable PC
