banner_page

DG506ACJ+

1μs, 400ns 450Ohm Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-DIP (0.600, 15.24mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG506ACJ+
  • Package: 28-DIP (0.600, 15.24mm)
  • Datasheet: PDF
  • Stock: 338
  • Description: 1μs, 400ns 450Ohm Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-DIP (0.600, 15.24mm)(Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DG506A
Pin Count 28
Operating Supply Voltage 15V
Number of Channels 16
Number of Circuits 1
Operating Supply Current 300μA
Propagation Delay 600 ns
Turn On Delay Time 1 μs
Logic Function Multiplexer
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 400 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 450Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 16:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 6pF 45pF
On-state Resistance Match-Nom 16.2Ohm
Switch Time (Ton, Toff) (Max) 1μs, 400ns
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.02A
Voltage - Supply, Dual (V±) ±4.5V~18V
Height 4.45mm
Length 37.34mm
Width 14.61mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 28-DIP (0.600, 15.24mm)
Number of Pins 28
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1996
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Resistance 400Ohm
Terminal Finish Tin (Sn)
Max Power Dissipation 1.143W
Technology CMOS

DG506ACJ+ Overview


This electronic part is conveniently packaged in 28-DIP (0.600, 15.24mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 28 terminations. High-quality output is provided by the electronic component's 16 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 28 series. A 1 circuit is present in this switch device. DG506A can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 400Ohm. Datasheets for 28 pin functions are available upon request. Digital switch that provides Dual power at a cost-effective price. The analogue multiplexer could operate on 300μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 15V operating voltages for the electrical part.

DG506ACJ+ Features


16 Channels
300μA Supply Current

DG506ACJ+ Applications


There are a lot of Maxim Integrated DG506ACJ+ Analog Switches & Multiplexers ICs applications.

  • T1/E1 Terminals
  • Communications systems
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Remote Powered Equipment
  • ATM
  • Wireless Local Loop
  • Automotive applications
  • Avionics test equipment
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Frame Relay Equipment

Write a review

Note: HTML is not translated!
    Bad           Good