banner_page

DG506ACWI+

1μs, 400ns 450Ohm Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG506ACWI+
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 630
  • Description: 1μs, 400ns 450Ohm Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1996
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Resistance 450Ohm
Max Power Dissipation 1W
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DG506A
Pin Count 28
Operating Supply Voltage 18V
Number of Channels 16
Number of Circuits 1
Operating Supply Current 130μA
Propagation Delay 600 ns
Turn On Delay Time 1 μs
Logic Function Multiplexer
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 400 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 450Ohm
Min Dual Supply Voltage 4.5V
High Level Output Current 20mA
Multiplexer/Demultiplexer Circuit 16:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 6pF 45pF
On-state Resistance Match-Nom 16.2Ohm
Switch Time (Ton, Toff) (Max) 1μs, 400ns
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.02A
Voltage - Supply, Dual (V±) ±4.5V~18V
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DG506ACWI+ Overview


The electronic part can be shipped overseas conveniently because it is packaged in 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 28 terminations. High-quality output is provided by the electronic component's 16 channels. A 15V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 28 series. This multiplexer is composed of 1 circuits. Try searching with DG506A to find analog multiplexer variants. There is 450Ohm internal resistance in this digital multiplexer. Datasheets for functions of 28 pins are available. A cost-effective Dual supply type analogue multiplexer. 130μA current would be enough for this multiplexer to operate. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. There is a voltage range of 18V operating voltages for the electrical part.

DG506ACWI+ Features


16 Channels
130μA Supply Current

DG506ACWI+ Applications


There are a lot of Maxim Integrated DG506ACWI+ Analog Switches & Multiplexers ICs applications.

  • Digital cross connects (DSX-1)
  • Medical Instrumentation
  • Residential Gateways, Home Gateway/Router
  • Battery Powered Systems
  • Multi-Line E1 Interface Cards
  • Power routing
  • PDH Multiplexers
  • Microwave transmission systems
  • Automatic test equipment
  • Precision instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good