DG506ACWI+T
| Parameters | |
|---|---|
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 45pF |
| On-state Resistance Match-Nom | 16.2Ohm |
| Switch Time (Ton, Toff) (Max) | 1μs, 400ns |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 400ns |
| Signal Current-Max | 0.02A |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.67mm |
| Width | 7.495mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG506A |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
DG506ACWI+T Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 16:1. Extended operating temperature around 0°C~70°C TA. In total, 28 terminations have occurred. This electronic part offers high-quality output due to its 16 channels. A 15V voltage supply should turn on and run the electronic component. As part of its design, the 28 series is equipped with this electronic component. This multiplexer is composed of 1 circuits. Try searching with DG506A if you're looking for variants. Theswitch device is a typical Multiplexer or Switches. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. In order to power the analogue multiplexer, it requires an input voltage of 4.5V volts.
DG506ACWI+T Features
16 Channels
DG506ACWI+T Applications
There are a lot of Maxim Integrated DG506ACWI+T Analog Switches & Multiplexers ICs applications.
- Communications systems
- Signal routing between systems
- Imaging
- Residential Gateways, Home Gateway/Router
- Audio signal routing
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Precision test equipment
- Optical Applications
- USB 1.1 signal switching circuits
- Digital cross connects (DSX-1)
