DG506ADN+

1μs, 400ns 450Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-LCC (J-Lead)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG506ADN+
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 923
Description: 1μs, 400ns 450Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG506A 28 Pins 5nA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Surface Mount	YES
Number of Pins	28
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG506A
Pin Count	28
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	16
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	18V
On-State Resistance (Max)	450Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	6pF 45pF
On-state Resistance Match-Nom	16.2Ohm
Switch Time (Ton, Toff) (Max)	1μs, 400ns
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Voltage - Supply, Dual (V±)	±4.5V~18V
Height Seated (Max)	2.54mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG506ADN+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 28-LCC (J-Lead). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 16:1. There are 28 terminations totally. A electrical component with 16 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 28 pins. There are 1 circuits in this multiplexer. Try searching with DG506A to find analog multiplexer variants. You can find the functions of the 28 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. There is no problem with using dual supply voltage, but it should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. This switch multiplexer may malfunction at temperatures above 85°C. The operating environment should be set to over -40°C.