DG506BEN-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 450Ohm |
| Max Power Dissipation | 1.693W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG506 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 100μA |
| Element Configuration | Single |
| Nominal Supply Current | 5μA |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| -3db Bandwidth | 114MHz |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 13pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 220ns |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±5V~20V |
| Height | 4.57mm |
| Length | 11.582mm |
| Width | 11.582mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DG506BEN-T1-GE3 Overview
The electrical component comes in 28-LCC (J-Lead) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 16:1. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 28. This electronic part offers high-quality output due to its 16 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. It is injected into the electrical part body with 28 pins. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG506. Analog switches have 450Ohm internal resistance. You can find the functions of the 28 pins in the datasheets. Multiplexers should not be powered above 20V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 5V. An operating current of 100μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. It can operate from 12V operating voltages.
DG506BEN-T1-GE3 Features
16 Channels
100μA Supply Current
-3db Bandwidth: 114MHz
DG506BEN-T1-GE3 Applications
There are a lot of Vishay Siliconix DG506BEN-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Imaging
- PBX interfaces
- Audio signal routing
- ATM
- Cellular phones
- SDH/SONET multiplexers
- Routers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Data switching
- Signal routing between systems
