DG506BEQ-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 450Ohm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG506 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 5μA |
| Power Dissipation | 817mW |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| -3db Bandwidth | 114MHz |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 13pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 220ns |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±5V~20V |
| Length | 9.7mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DG506BEQ-T1-GE3 Overview
Packed in 28-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Operating temperature around -40°C~125°C TA extended. 28 terminations have been made so far. Due to its 16 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 28 series of products. 1 circuits are used in this analogue multiplexer. Use DG506 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 450Ohm. The functions of 28 pins can be found in the datasheets. Multiplexers should not be powered above 44V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 12V. In order to operate this switch device, it would need a current of 100μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. If you are using dual power supplies, you should attach at least 5V. Among the inputs that can be operated are the 16 inputs.
DG506BEQ-T1-GE3 Features
16 Channels
100μA Supply Current
-3db Bandwidth: 114MHz
DG506BEQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG506BEQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Optical Applications
- Cellular phones
- Fault Tolerant Systems
- DSUs
- Multiplexers
- Video switching
- Avionics test equipment
- PDH Multiplexers
- Video signal routing
