DG506BEW-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 450Ohm |
| Max Power Dissipation | 840mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG506 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 100μA |
| Element Configuration | Single |
| Nominal Supply Current | 5μA |
| Power Dissipation | 840mW |
| Max Supply Current | 100μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 250 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 114MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 220 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 13pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±5V~20V |
| Height | 2.31mm |
| Length | 17.91mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DG506BEW-T1-GE3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 28 terminations. A high-quality output is provided by the electrical component's 16 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 28 pins are injected into the electrical part body. This multiplexer is composed of 1 circuits. Try searching for DG506 variants of the analog switch ic. Analog switches have 450Ohm internal resistance. To find out what the functions of 28 pins are, please refer to their datasheets. Multiplexers should not be powered above 44V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 12V. In order to operate this switch device, it would need a current of 100μA. A digital multiplexer may suffer damage if voltage is applied above 100μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIn the case of dual power supplies, you should connect at least 5V. There is a voltage range of 15V operating voltages for the electrical part. There are 114MHz bandwidths for data transfer.
DG506BEW-T1-GE3 Features
16 Channels
100μA Supply Current
Bandwidth: 114MHz
DG506BEW-T1-GE3 Applications
There are a lot of Vishay Siliconix DG506BEW-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Switching Systems
- Precision test equipment
- Public switching systems
- DSLAMs
- RGB switches
- Microwave transmission systems
- Transmit
- SONET
- Cable Modem
