DG507ACJ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.143W |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG507A |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 300μA |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 45pF |
| On-state Resistance Match-Nom | 16.2Ohm |
| Switch Time (Ton, Toff) (Max) | 1μs, 400ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG507ACJ+ Overview
As the electronic part is packed in 28-DIP (0.600, 15.24mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to 0°C~70°C TA. Totally, there are 28 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. A total of 28 pins are injected into the electrical part body. There are 2 circuits in this multiplexer. Search with DG507A if you are looking for analog multiplexer variants. An switch multiplexer with 450Ohm internal resistance has a value of 450Ohm. To find out what the 28 pins do, please refer to the datasheets. A analog switch ic that has a cost-effective Dual supply type. For this digital switch to work, 300μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. The voltage should be at least 4.5V if you are using dual power supplies. A voltage of 15V can be used to operate the electronic component.
DG507ACJ+ Features
1 Channels
300μA Supply Current
DG507ACJ+ Applications
There are a lot of Maxim Integrated DG507ACJ+ Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Channel Banks
- Relay replacements
- Industrial control systems
- PCMCIA cards
- Routers
- Digital cross connects (DSX-1)
- Cellular phones
- PBX interfaces
- New designs requiring multiplexer functions
