DG507ACWI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG507A |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 300μA |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 45pF |
| On-state Resistance Match-Nom | 16.2Ohm |
| Switch Time (Ton, Toff) (Max) | 1μs, 400ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG507ACWI+ Overview
Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around 0°C~70°C TA are extended for operation. 28 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 28 series, this electronic part has been incorporated into the system. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with DG507A. Analog switches have 400Ohm internal resistance. The functions of 28 pins can be found in the datasheets. Analog switch ics with Dual supply type are cost-effective. The analogue multiplexer could operate on 300μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 15V operating voltages.
DG507ACWI+ Features
1 Channels
300μA Supply Current
DG507ACWI+ Applications
There are a lot of Maxim Integrated DG507ACWI+ Analog Switches & Multiplexers ICs applications.
- HDTV
- E1 Multiplexer
- SONET/SDH ADM
- Video signal routing
- Communications systems
- Signal routing between systems
- Transmit
- Microprocessor Controlled Analog Systems
- Cable Modem
- Modems
