DG507BEQ-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 402.988471mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 450Ohm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG507 |
| Pin Count | 28 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 5μA |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.1mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| -3db Bandwidth | 217MHz |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 84 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 17pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -84dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 310ns |
| Signal Current-Max | 0.03A |
| Length | 9.7mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG507BEQ-T1-GE3 Overview
As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. Total terminations are 28. As a result of its 8 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 28 pins. A 2 circuit is present in this switch device. Search with DG507 if you are looking for analog multiplexer variants. Analog switches have 450Ohm internal resistance. Datasheets for functions of 28 pins are available. Users should never supply a voltage higher than 20V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 5V as the lowest voltage for the electrical part. For this multiplexer to operate, 100μA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 20V. When using dual power supplies, you should attach at least 5V.
DG507BEQ-T1-GE3 Features
8 Channels
100μA Supply Current
-3db Bandwidth: 217MHz
DG507BEQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG507BEQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Relay Replacement
- FTTH
- Communications systems
- Audio and video signal routing
- Channelized and Unchannelized DS3 applications
- Fiber to the Home
- Power routing
- Transmit
- Isolation
