banner_page

DG507BEW-T1-GE3

250ns, 200ns 300Ohm Analog Switches BREAK-BEFORE-MAKE DG507 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-DG507BEW-T1-GE3
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 526
  • Description: 250ns, 200ns 300Ohm Analog Switches BREAK-BEFORE-MAKE DG507 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Weight 2.214806g
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2011
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Resistance 450Ohm
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG507
Pin Count 28
Number of Channels 1
Number of Circuits 2
Max Supply Voltage 44V
Min Supply Voltage 12V
Operating Supply Current 100μA
Nominal Supply Current 5μA
Power Dissipation 840mW
Logic Function Multiplexer
Number of Inputs 16
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Max Dual Supply Voltage 20V
-3db Bandwidth 217MHz
On-State Resistance (Max) 300Ohm
Min Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 84 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 3pF 17pF
On-state Resistance Match-Nom 10Ohm
Switch Time (Ton, Toff) (Max) 250ns, 200ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 10 Ω
Crosstalk -84dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.03A
Voltage - Supply, Dual (V±) ±5V~20V
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant

DG507BEW-T1-GE3 Overview


The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. A total of 28 terminations have been recorded. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 28 series. There are 2 circuits in this switch device. Using the DG507 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 450Ohm. To find out what the 28 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 44V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. There should be 12V voltage fed to the electrical part below 12V. This multiplexer would work with 100μA current. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. There are 16 inputs to be operated.

DG507BEW-T1-GE3 Features


1 Channels
100μA Supply Current
-3db Bandwidth: 217MHz

DG507BEW-T1-GE3 Applications


There are a lot of Vishay Siliconix DG507BEW-T1-GE3 Analog Switches & Multiplexers ICs applications.

  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • PDAs
  • Modems
  • Channel Banks
  • Digital access cross connects
  • Communications systems
  • Audio and video routing
  • Avionics and Military Systems
  • Video signal routing
  • E1 Multiplexer

Write a review

Note: HTML is not translated!
    Bad           Good