banner_page

DG508AAK/883B

1μs, 700ns 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-CDIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG508AAK/883B
  • Package: 16-CDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 595
  • Description: 1μs, 700ns 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 16-CDIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2000
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 400Ohm
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Multiplexer or Switches
Max Power Dissipation 800mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 16
Operating Supply Voltage 15V
Number of Channels 8
Number of Circuits 1
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 200μA
Propagation Delay 1 μs
Turn On Delay Time 1 μs
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 700 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 400Ohm
Min Dual Supply Voltage 4.5V
Screening Level MIL-STD-883 Class B
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 5pF 25pF
On-state Resistance Match-Nom 10.2Ohm
Switch Time (Ton, Toff) (Max) 1μs, 700ns
Channel-to-Channel Matching (ΔRon) 24 Ω
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±) ±4.5V~18V
Height Seated (Max) 5.08mm
Width 7.62mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

DG508AAK/883B Overview


Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. 1 circuits are used in this analogue multiplexer. The internal resistance of this digital multiplexer is 400Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. The switch device would be able to operate with 200μA current. There is no problem with using dual supply voltage, but it should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There is a voltage range of 15V operating voltages for the electrical part.

DG508AAK/883B Features


8 Channels
200μA Supply Current

DG508AAK/883B Applications


There are a lot of Maxim Integrated DG508AAK/883B Analog Switches & Multiplexers ICs applications.

  • PCMCIA cards
  • Routers
  • Medical systems
  • Precision instrumentation
  • Optical Applications
  • Isolation
  • Intelligent PBX
  • DVD-R
  • Automotive applications
  • Private Branch Exchange (PBX)

Write a review

Note: HTML is not translated!
    Bad           Good