DG508ADY+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG508A |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Voltage | 32V |
| Number of Circuits | 1 |
| Operating Supply Current | 200μA |
| Throw Configuration | DPST |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG508ADY+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. 1 circuits are used in this analogue multiplexer. Search with DG508A if you are looking for analog multiplexer variants. It has an internal resistance of 300Ohm. For details about the functions of 16 pins, please refer to the datasheets. An effective Dual supply digital multiplexer. For this multiplexer to operate, 200μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. It is recommended that you attach at least 4.5V to your dual power supply. There is a voltage range of 15V operating voltages for the electrical part.
DG508ADY+ Features
8 Channels
200μA Supply Current
DG508ADY+ Applications
There are a lot of Maxim Integrated DG508ADY+ Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- T1/E1 Terminals
- Power routing
- Communication systems
- ISDN NT1/TA
- Cable PC
- Audio and video routing
- Relay replacements
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Isolation
