DG508AEWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG508A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 10.2Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG508AEWE+T Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. A 1 circuit is present in this switch device. Try searching for DG508A variants of the analog switch ic. There is Multiplexer or Switches analog multiplexer like this in the world. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. For the switch device to function, a voltage of 4.5V is required.
DG508AEWE+T Features
8 Channels
DG508AEWE+T Applications
There are a lot of Maxim Integrated DG508AEWE+T Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Routers
- USB 1.1 signal switching circuits
- PBX interfaces
- Audio and video switching
- CSU
- ISDN NT1/TA
- High-Voltage
- Wireless Local Loop
