DG508BEJ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 500Ohm |
| Max Power Dissipation | 501mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DG508 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 500μA |
| Power Dissipation | 510mW |
| Turn On Delay Time | 340 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 250MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 380Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 81 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 13pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 240ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -88dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±5V~20V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG508BEJ-E3 Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A 1 circuit is present in this switch device. DG508 can be used to search for analog multiplexer variants. An switch multiplexer with 500Ohm internal resistance has a value of 500Ohm. Datasheets for 16 pin functions are available upon request. normally, users should not supply switches with voltages higher than 44V. Analog switch ics with Dual supply type are cost-effective. There should be 12V voltage fed to the electrical part below 12V. This digital switch can be operated with a current of 500μA. Despite this switch's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. A voltage of 15V can be used to operate the electronic component. In order to operate the 8 inputs, there are several steps to follow. It is possible to transfer data over a 250MHz-bandwidth.
DG508BEJ-E3 Features
8 Channels
500μA Supply Current
Bandwidth: 250MHz
DG508BEJ-E3 Applications
There are a lot of Vishay Siliconix DG508BEJ-E3 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Switching Systems
- T1/E1 Terminals
- SONET
- Microprocessor Controlled Analog Systems
- ISDN NT1/TA
- SDH
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Mechanical reed relay replacement
- Industrial control systems
