DG508BEN-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 380Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 5V |
| Element Configuration | Single |
| Nominal Supply Current | 6mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 380Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 81 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 13pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 250ns, 240ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -88dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 340ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±5V~20V |
| Height | 750μm |
| Length | 2.6mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG508BEN-T1-GE4 Overview
The electrical component comes in 16-WFQFN packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. 16 terminations have been made so far. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. In this multiplexer, the internal resistance is 380Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 20V to a switch device. The lowest voltage the electronic part should receive is 5V. Despite this switch's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. Operating voltages of 12V are compatible with the electrical part.
DG508BEN-T1-GE4 Features
8 Channels
-3db Bandwidth: 250MHz
DG508BEN-T1-GE4 Applications
There are a lot of Vishay Siliconix DG508BEN-T1-GE4 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- HDTV
- High-Voltage
- Relay Replacement
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- E1 Network Equipment
- MP3 players
- Ultrasound
- Avionics test equipment
- Low-Voltage
