DG508BEY-T1-E3

250ns, 240ns 380Ohm Analog Switches BREAK-BEFORE-MAKE DG508 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG508BEY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 152
Description: 250ns, 240ns 380Ohm Analog Switches BREAK-BEFORE-MAKE DG508 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	500Ohm
Max Power Dissipation	640mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG508
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	44V
Min Supply Voltage	12V
Operating Supply Current	500μA
Nominal Supply Current	600μA
Power Dissipation	640mW
Max Supply Current	-200μA
Propagation Delay	300 ns
Turn On Delay Time	300 ns
Logic Function	Multiplexer
Number of Inputs	8
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	380Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 13pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	250ns, 240ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Signal Current-Max	0.03A
Voltage - Supply, Dual (V±)	±5V~20V
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week

DG508BEY-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -40°C~125°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with DG508. An switch multiplexer with 500Ohm internal resistance has a value of 500Ohm. To find out what the 16 pins do, please refer to the datasheets. In normalcircumstances, users should not exceed 44V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. 12V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 500μA. A voltage higher than -200μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. With dual power supplies, you should attach at least 5V. 15V operating voltages are supported by the electronic component. In order to operate the 8 inputs, there are several steps to follow. This switch operates within the bandwidth of 250MHz.