banner_page

DG509ACWE+

1.5μs, 1μs SP4T 450Ohm Analog Switches BREAK-BEFORE-MAKE DG509A 16 Pins 1nA 15V 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DG509ACWE+
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 717
  • Description: 1.5μs, 1μs SP4T 450Ohm Analog Switches BREAK-BEFORE-MAKE DG509A 16 Pins 1nA 15V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 300Ohm
Max Power Dissipation 762mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DG509A
Pin Count 16
Operating Supply Voltage 18V
Number of Channels 1
Number of Circuits 2
Operating Supply Current 200μA
Throw Configuration 4PST
Propagation Delay 1 μs
Turn On Delay Time 1.5 μs
Logic Function Multiplexer
Supply Type Dual
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 1 μs
Max Dual Supply Voltage 18V
On-State Resistance (Max) 450Ohm
Min Dual Supply Voltage 4.5V
High Level Output Current 20mA
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 12pF
On-state Resistance Match-Nom 27Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 1.5μs, 1μs
Channel-to-Channel Matching (ΔRon) 27 Ω
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±) ±4.5V~18V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DG509ACWE+ Overview


The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. Try searching for DG509A variants of the analog switch ic. As far as internal resistance is concerned, it has 300Ohm. Datasheets for functions of 16 pins are available. Analog switch ics with Dual supply type are cost-effective. In order to operate this switch device, it would need a current of 200μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. In the case of dual power supplies, you should connect at least 4.5V. The electrical part can be operated at 18V voltage levels.

DG509ACWE+ Features


1 Channels
Switch Circuit: SP4T
200μA Supply Current

DG509ACWE+ Applications


There are a lot of Maxim Integrated DG509ACWE+ Analog Switches & Multiplexers ICs applications.

  • Communication systems
  • Relay Replacement
  • ATM
  • PDH Multiplexers
  • Intelligent PBX
  • Channelized and Unchannelized DS3 applications
  • Audio and video routing
  • Ultrasound
  • Medical systems
  • Data switching

Write a review

Note: HTML is not translated!
    Bad           Good