DG509ACWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
DG509ACWE Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. This digital multiplexer requires 4.5V voltage as a minimum supply voltage.
DG509ACWE Features
4 Channels
Switch Circuit: SP4T
DG509ACWE Applications
There are a lot of Maxim Integrated DG509ACWE Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- DSUs
- Power routing
- Automotive applications
- Mechanical reed relay replacement
- 65 V DACs
- Private Branch Exchange (PBX)
- Data switching
- High speed data transmission line cards
- SDH/SONET multiplexers
