DG509ACWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG509A |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 200μA |
| Throw Configuration | 4PST |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 10.2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG509ACWE+T Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around 0°C~70°C TA are extended for operation. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. A 15V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Use DG509A to search for variants of the digital switches. The internal resistance of this digital multiplexer is 300Ohm. Please refer to the datasheets for 16 pins functions. Analog switch ics with Dual supply type are cost-effective. 200μA current would be enough for this multiplexer to operate. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. The voltage should be at least 4.5V if you are using dual power supplies. This electrical part is compatible with 15V operating voltages.
DG509ACWE+T Features
1 Channels
Switch Circuit: SP4T
200μA Supply Current
DG509ACWE+T Applications
There are a lot of Maxim Integrated DG509ACWE+T Analog Switches & Multiplexers ICs applications.
- Power routing
- Multi-Line E1 Interface Cards
- Audio and video switching
- Industrial and process control systems
- SDH/SONET multiplexers
- Battery Powered Systems
- Routers
- E1 Multiplexer
- Channelized and Unchannelized DS3 applications
- Microprocessor Controlled Analog Systems
