DG509ADY+T
| Parameters | |
|---|---|
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG509A |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| On-state Resistance Match-Nom | 10.2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
DG509ADY+T Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. SP4T switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with DG509A. There is a standard Multiplexer or Switches analogue multiplexer here. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. To power the multiplexer ics, the voltage must be set at 4.5V.
DG509ADY+T Features
4 Channels
Switch Circuit: SP4T
DG509ADY+T Applications
There are a lot of Maxim Integrated DG509ADY+T Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Industrial control systems
- PDH Multiplexers
- MP3 players
- Wireless Local Loop
- Battery-powered systems
- E1 Multiplexer
- Avionics test equipment
- Digital Cross-Connects
- Voice over IP/DSL – Integrated Access Devices, Smart
