DG509BEY-T1-E3

250ns, 240ns SP4T 380Ohm Analog Switches BREAK-BEFORE-MAKE DG509 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG509BEY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 446
Description: 250ns, 240ns SP4T 380Ohm Analog Switches BREAK-BEFORE-MAKE DG509 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	500Ohm
Terminal Finish	MATTE TIN
Max Power Dissipation	640mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG509
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	44V
Min Supply Voltage	12V
Operating Supply Current	500μA
Nominal Supply Current	600μA
Power Dissipation	640mW
Max Supply Current	-200μA
Propagation Delay	300 ns
Turn On Delay Time	300 ns
Logic Function	Multiplexer
Number of Inputs	8
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	380Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 8pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 240ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Signal Current-Max	0.03A
Voltage - Supply, Dual (V±)	±5V~20V
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG509BEY-T1-E3 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 2 circuits. Try searching with DG509 to find analog multiplexer variants. It has an internal resistance of 500Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users should never supply a voltage higher than 44V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 12V. In order to operate this switch device, it would need a current of 500μA. Putting voltage greater than -200μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 20V. The voltage should be at least 5V if you are using dual power supplies. 15V operating voltages can be used with this electrical part. It is possible to operate 8 inputs. In 250MHz-bandwidths, data can be transferred.