DG528EWN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | DG528 |
| Pin Count | 18 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 2.5mA |
| Throw Configuration | SP8T |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1.5 μs |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.5μs |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG528EWN+ Overview
The electronic component is convenient to ship overseas because it is packed in a 18-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 18 terminations. A 8 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. This electrical component is included in the 18 series of products. It consists of 1 circuits. DG528 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 400Ohm. To find out what the 18 pins do, please refer to the datasheets. A voltage higher than 30V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. A low voltage of 5V should be applied to the electronic component. For this digital switch to work, 2.5mA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. With dual power supplies, you should attach at least 4.5V. Operating voltages of 28V are compatible with the electrical part.
DG528EWN+ Features
8 Channels
2.5mA Supply Current
DG528EWN+ Applications
There are a lot of Maxim Integrated DG528EWN+ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- New designs requiring multiplexer functions
- High speed data transmission line cards
- Power routing
- E1 Multiplexer
- Communication systems
- ISDN NT1/TA
- Data Acquisition Systems
- Relay replacements
- Cross Connects
