DG529AK/883
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Resistance | 400Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 18 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 7V |
| Screening Level | 38535Q/M;38534H;883B |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 24 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG529AK/883 Overview
Shipping overseas is convenient due to the electrical component's packing in 18-CDIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Through Hole position. 4:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, 18 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. A 15V voltage supply should turn on and run the electronic component. An injection of 18 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. It has an internal resistance of 400Ohm. Datasheets for functions of 18 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. A low voltage of 13V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 22VWhen using dual power supplies, you should attach at least 7V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
DG529AK/883 Features
4 Channels
Switch Circuit: SP4T
DG529AK/883 Applications
There are a lot of Vishay Siliconix DG529AK/883 Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Medical
- Data Acquisition Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PBXs
- High speed data transmission line cards
- High reliability control systems
- Video signal routing
- High-Voltage
- Voice over IP/DSL – Integrated Access Devices, Smart
