DG529CWN+T
| Parameters | |
|---|---|
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1500ns |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG529 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.5μs |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
DG529CWN+T Overview
Due to its 18-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to 0°C~70°C TA. In total, there have been 18 terminations. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A key feature of the 18 series is the inclusion of this electronic part as part of its design. SP4T switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. Search with DG529 if you are looking for analog multiplexer variants. Theswitch device is a typical Multiplexer or Switches. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
DG529CWN+T Features
4 Channels
Switch Circuit: SP4T
DG529CWN+T Applications
There are a lot of Maxim Integrated DG529CWN+T Analog Switches & Multiplexers ICs applications.
- Video switching
- Residential Gateways, Home Gateway/Router
- Private Branch Exchange (PBX)
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Relay replacements
- FTTH
- 65 V DACs
- SONET
- HDTV
