DG529DJ+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | TIN |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG529 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 3μA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1.5 μs |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 27Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.5μs |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 27 Ω |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1500ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG529DJ+ Overview
Due to its 18-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 18. This electronic part offers high-quality output due to its 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 18 series. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. DG529 can be used to search for analog multiplexer variants. An switch multiplexer with 400Ohm internal resistance has a value of 400Ohm. For functions related to 18 pins, please refer to the datasheets. A voltage higher than 30V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 3μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. A dual power supply should have at least 4.5V voltage attached. Operating voltages range from 15V.
DG529DJ+ Features
8 Channels
Switch Circuit: SP4T
3μA Supply Current
DG529DJ+ Applications
There are a lot of Maxim Integrated DG529DJ+ Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Ultrasound
- Remote Powered Equipment
- Channel Banks
- Optical Applications
- Mechanical reed relay replacement
- MP3 players
- Wireless Local Loop
- Cable PC
- New designs requiring multiplexer functions
