DG604EQ-T1-E3

60ns, 52ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE DG604 14 Pins 100pA 5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG604EQ-T1-E3
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 689
Description: 60ns, 52ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE DG604 14 Pins 100pA 5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Weight	140.30179mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	160Ohm
Terminal Finish	MATTE TIN
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG604
Pin Count	14
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	450mW
Max Supply Current	500nA
Propagation Delay	70 ns
Turn On Delay Time	108 ns
Logic Function	Multiplexer
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Bandwidth	290MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	76 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	400MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	30mA
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.7pF 7.3pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	60ns, 52ns
Charge Injection	0.7pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-81dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Height	900μm
Length	5mm
Width	4.4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG604EQ-T1-E3 Overview

As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Total terminations are 14. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. It is part of the design of the 14 series that this electronic component is included. The analog switch ics are built using SPST - NO switching circuits. There are 2 circuits in this multiplexer. Look for analog switch ic variants by searching with DG604. The internal resistance of this digital multiplexer is 160Ohm. Datasheets for functions of 14 pins are available. Users shouldn't supply more than 12V voltage to the switch device. An effective Dual, Single supply digital multiplexer. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with 1μA current. When the digital multiplexer is charged above 500nA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIf you are using dual power supplies, you should attach at least 2.7V. The electrical component supports 4 inputs. There are various bandwidths available for data transfer.